![]() Typical substrates are plywood, MDF and particleboard. Please check the manufacture date on the peel-off film. After this date the adhesive may begin to react with the polyurethane surface. When in doubt peel the film in the area, or up to the area that is suspect. The recommended shelf life of the peel-off protective film is 1 year. The protective film is clear enough that you may inspect the material without removing it. Colour uniformity and quality checks should be carried out on the sheets before working with the veneer. ![]() We recommend that you leave the film on the surface while working the veneer. The sheets are always to be handled by 2 people.Įveneer Prefinished is supplied with a clear protective film. Wrap in dark, opaque plastic to assure stability. It is not recommended that the veneer be stored in rolls.Īs for all wood surfaces, they must be protected from sunlight and humidity. ![]() ![]() Contact Elton Group for rolling instructions. However, some specific features of wood surfaces require particular care.Įveneer Prefinished sheets must be stacked flat, horizontally, face to face, at an ambient temperature between 10C and 30C and a relative humidity between 40% and 60%. If the sheets are to be rolled, care should be taken to avoid bending or cracking. Eveneer Prefinished can be handled stocked and worked mainly as a traditional HPL sheet.
0 Comments
Leave a Reply. |